Industrial Joystick Controller

Series - TRY10
 

TRY10 Joystick Series

Non-Contacting Hall Effect / USB Joysticks
  
      Download 

TRY10 series of hall effect joysticks

* Single, Dual & Triple Axis
* High Accuracy, Long Life
* Pushbutton(s) Models
* USB Versions
* Center Detect Option
* IP65 (some models)
* Stainless Steel Shaft
 

  

    

Joystick Electrical Specifications

Supply Voltage       

 5VDC ±10%

Output Voltage

 0 ~ 5VDC (proportional to handle travel)

Center Voltage

 2.5VDC (±25mV)

Supply Current                       (dual axis)

 4.8mA ~ 11mA

Supply Current                      (triple axis)

 7.2mA ~ 16.5mA

Resolution

Infinite

Response

40~80uSec

Output Current
±2mA

Electrical MTBF

 1,000,000 operational (power on) hours

Linearity

 ±2% FS

Pushbutton Switch Ratings

 5 ~ 24VDC, 1 ~ 50mA (resistive)

Joystick Mechanical Specifications

Joystick Handle Travel             (X,Y axis)

 ±18º from center (36º overall)

Joystick Handle Travel                (Z axis)

 ±40º from center (80º overall)

Center Return Accuracy

 ±1%

Operation Force

 2.25N Nominal

Mechanical MTBF

 3,000,000 cycles, normal operation

Panel Thickness

 0.046 ~ 0.125"  (1.17 to 3.17mm)

Weight

 approx. 0.2 lbs.

Joystick Environmental Specifications

IP Protection Grade

 With rubber boot; IP54 ~ IP65 (varies with handel)  Without rubber boot: IP50

Operating Temperature

 -40ºC ~ +85ºC

Storage Temperature

 -55ºC ~ +165ºC

Flammability Rating

 94HB

Mechanical MTBF

 3,000,000 cycles, normal operation

 

Joystick Materials

Shaft

 0.25" (6.35mm) diameter stainless steel

Housing

 High impact glass-filled nylon

Boot and Gasket

 Thermoplastic rubber

Handle(s)

 High impact glass-filled nylon or thermoset phenolic

Joystick Basic Dimensions

TRY10 joystick basic dimensions

Joystick Handle Variations

TRY10 hall effect joystick handle types

 

Joystick Mounting Options

TRY10 joystick mounting variations

Joystick Panel Cut-Out Dimensions

TRY10 joystick panel mounting arrangements

 

Joystick Axis Orientation, Output Wiring & Output Voltage Characteristics

TRY10 joystick orientation, wiring and sensor schematic

Joystick Handle Deflection Limiter Plates

  

Joystick Options

Center Detect

Dual Decode

Friction Hold

Additional output provides 0Vdc at center, 5Vdc when not in center. Not available with USB version.

Secondary (duplicate) output of X, Y or Z axis. Not available with USB version

Without spring return to center. Handle will hold position. For X and Y axis only with limiter plate 3 (round)

Standard Stock Models:  Generally in stock or with short lead times.

Model:  TRY10 - 1 5 1 1 8 1 1

TRY10 standard single axis joystick

* Single Axis

* Handle Type 1

* Slotted Limiter Plate Type 8

* Drop-In Mount Type 1

Model:  TRY10 - 2 5 1 1 1 1 1

TRY10 standard dual axis joystick

* Dual Axis

* Handle Type 1

* Square Limiter Plate Type 1

* Drop-In Mount Type 1

Model:  TRY10 - 3 5 1 4 1 1 1

TRY10 standard dual axis joystick with pushbutton

* Dual Axis

* Pushbutton Handle Type 4

* Square Limiter Plate Type 1

* Drop-In Mount Type 1

Model:  TRY10 - 4 5 1 6 1 1 1

TRY10 standard triple axis joystick

* Triple Axis

* Handle Type 6

* Square Limiter Plate Type 1

* Drop-In Mount Type 1

Model:  TRY10 - 5 5 1 9 1 1 1

TRY10 standard triple axis joystick with single pushbutton

* Triple Axis

* Pushbutton Handle Type 9

* Square Limiter Plate Type 1

* Drop-In Mount Type 1

Model:  TRY10 - 5 5 1 A 1 1 5

TRY10 standard triple axis joystick with dual pushbuttons

* Triple Axis

* Pushbutton(s) Handle Type A

* Square Limiter Plate Type 1

* Rear Mount  (A or B)

Model:  TRY10 - 3 5 1 4 3 5 1

TRY10 standard USB dual axis joystick with pushbutton

* Dual Axis

* USB

* Pushbutton Handle Type 4

* Circle Limiter Plate Type 3

* Drop-In Mount Type 1

Model:  TRY10 - 5 5 1 A 1 5 1

TRY10 standard triple axis USB joystick with dual pushbuttons

* Triple Axis

* USB

* Pushbutton(s) Handle Type A

* Square Limiter Plate Type 1

* Drop-In Mount Type 1

Ordering Code

Joystick Series

TRY10 - 

                

Single Axis

   1              

Dual Axes

   2              

Dual Axes with Pushbutton

   3              

Triple Axes

   4              

Triple Axes with Pushbutton

   5              

Rubber Boot

     5            

With Spring Return

       1          

Friction Clutch (no spring, holds position)

       6          

Conical Handle

         1        

Ball Tip Handle

         3        

Dual Axes Handle with Pushbutton

         4        

Triple Axes Handle (no pushbuttons)

         6        

Triple Axes Handle with Single Pushbutton

         9        

Triple Axes Handle with Dual Pushbuttons

         A        

Square Limiter Plate

           1      

Diamond Limiter Plate (45º shifted from square)

           2      

Round Limiter Plate

           3      

Slotted Limiter Plate (single axis)

           8      

X/Y Limiter Plate 'Plus' (+ pattern, not 360º)

           9      

X/Y Limiter Plate 'Cross' (x pattern, not 360º)

           D      

0 ~ 5 VDC Output (rail to rail)

             1    

0.5 ~ 4.5 VDC Output

             2    

0.25 ~ 4.75 VDC Output

             3    

2 ~ 3 VDC Output

             4    

USB Interface Output

             5    

Mounting, Drop In 

               1  

Mounting, Flat

               2  

Mounting, Raised

               3  

Mounting, Snap On

               4  

Mounting, Rear

               5  

Dual Encoding (not available with USB version)

                 D

Center Detect (not available with USB version)

                 C

Higher Supply Voltage

                 V

Example:

TRY10-1511811 [single axis, rubber boot, spring return, handle type 1, 0 - 5VDC (hall effect) output, mounting type 1
 
 

P3 America, Inc.

3089C Clairemont Dr. #363 - San Diego, CA  92117

Phone: (858) 277-1420   Fax: (858) 225-0439

www.p3america.com
 

© P3 America, Inc. 2004 - 2007. All Rights Reserved