Industrial Hall Effect Joystick

Miniature Industrial Joystick - Hall Effect

Series - TRY20

TRY20 - Miniature Multi-Axis Joystick

Download

TRY20 joystick with protective boot

TRY20 joystick without protective boot

New Model!

Dual or Triple axes hall effect joystick in a compact, low profile housing. Ideal for electro-motive applications. Smooth, consistent feel throughout the travel on all axis. Suitable for use in industrial applications. IP54 rating above panel with optional rubber boot. Redundant output options.

Joystick Mechanical Specifications

Mechanical Operating Angle (X, Y axes)

±15º from center position (±2.5º)

Mechanical Operating Angle (Z axis)

±30º from center position (±2.5º)

Operating Force (X, Y axes)

1.5 ~ 3.5N (150~350gf)

Operating Force (Z axis)

15 ~ 30mN·m (150~300gf·cm)

Lever Strength (X, Y axes)

max. 50N (5kgf) static load at the handle

Z Axis Stopper Strength

max. 0.5N·m (5kgf·cm) stopper limit

Mechanical Life Span

1 million operations

Operating Temperature

-20ºC - +60ºC (-20ºC ~ +65ºC Storage)

Vibration

10~55Hz, 98m/s² (10G) (per MIL-STD-202F-204)

Shock

294m/s² (10G) (per MIL-STD-202F-213)

IP Protection Grade (above panel)

IP40 (w/out rubber boot), IP54 (w/ rubber boot above panel)

Materials

Nylon 66 with glass, 30% filled

Weight

approx. 42 grams (without packaging)

Joystick Electrical Specifications

Sensor Technology

Hall effect (contactless)

Resolution

Infinite

Independent Linearity Tolerance

±3% · FS

Electrical Operating Angle (X, Y axes)

approx. ±15º (30º)

Electrical Operating Angle (Z axis)

approx. ±30º (60º)

Supply Voltage

5VDC ±10% (5VDC ±0.5V)

Output Voltage (each axis)

10~90% · Vsupply ±3% or 5 ~ 95% · Vsupply ±3% or 0 ~ 100% · Vsupply ±3%

Center Return Accuracy

50% ±5% (2.5V ±25mV)

Current Consumption

6mA per axis (per output)

Load Resistance

>10K ohms (>100K ohms recommended)

Temperature Drift (max. signal)

< 2.5% · FS

Temperature Drift (center position)

< 1.0% · FS

EMC Immunity

50V/m (80MHz ~ 1GHz, 1KHz 80% sine wave modulation, IEC/EN61000-4-3)

ESD

IEC/EN61000-4-2, 5kV)

Temperature Drift at Center Position

< ±1% · FS

Dielectric Strength

1 minute at 250VAC

Insulation Resistance

> 100M ohms at 250VDC

Joystick Dimensions (mm)

Joystick Handle Operating Pattern and Orientation

Joystick Panel Arrangement (mm)

Joystick Terminations and Output Characteristics

Molex 51021-0800	Color	Designation
Pin 1	Brown	+5V In
Pin 2	Red	X axis, output A
Pin 3	Orange	X axis, output B
Pin 4	Yellow	Y axis, output A
Pin 5	Green	Y axis, output B
Pin 6	Blue	Z axis, output A
Pin 7	Purple	Z axis, output B
Pin 8	Gray	GND

TRY20 Joystick Ordering Code

TRY20 joystick ordering code

P3 America, Inc.

3089C Clairemont Dr. #363 - San Diego, CA 92117

Phone: (858) 277-1420 Fax: (858) 225-0439

www.p3america.com